Needle Valve

Home/Needle Valve
Needle Valve 2017-02-07T16:05:13+00:00

Needle Valve Manufacturer – Instrulok

A valve is a device for controlling the flow of liquids or gasses through tubes, usually in one direction only. The Needle Valve have tiny harbor and a needle-like plunger. Though it has the capacity to flow liquid in less speed, it actually adjusts the flow rate. The needle valve does this by creating a space which helps in a stable flow. To avoid over pressure in pipes, Safety Relief valve and Block valve are applicable to insulate machinery for maintenance. Moreover, to remove the pendulous unwanted matter such as dirt, Filters and Strainers come in use.

needle valve

needle valve,needle valve Manufacturer,needle valve Supplier

How to use Needle Valve?

A cavity with lengthy abate and thin plunger at bottom of screw helps Needle Valve get perfect seat. All you need to do is rotate the screw to make the liquid flow. The plunger should be nice taken back to ensure uncurb flow of the fluids through a seat and a plunger. Accurate organizing of the flowing speed is possible if fine-threaded screw keeps revolving to go back to a plunger.

The Vernier effect gives virtue of the needle valve. However, the resulting flow changes when a long tour of main input makes even a tiny change in its radial.

As the rate of flow is slow, valve system rotates a lot to firmly open or close it and here you absolutely can’t make use of Needle Valves for such easy shutoff applications.

1. To start or stop the liquid flow.
2. Controlling the flow density or pressure- at low-pressure areas where a stable low flow rate maintaining is compulsory.
3. Avoiding the back-flow
4. Releasing the unwanted gas
5. Often use in ordinary small Needle Valve to work as bleed valve in the water heating appliances.
6. Needle valve having a bleed and block program help in achieving solitarily with managing experiments at the install plant.

The Needle Valve from Instrulok are with a 100% guarantee of no leakage and are available in real discounted price. In addition to that, bumped and solidly created needle valve by Instrulok are also available in various size ranges (1/8″ to 1″), and stem tips(regulating, soft seat and v- stem). These work amazingly with any applications like hydraulic or pneumatic organizations. Moreover, the End connecting options consist of Male and female NPT, which are also produced at Instrulok with the ISO threads measuring from 1/8″ to 1″. Also, the needle valve at Instrulok available in stainless steel, alloy 400 and brass. No doubt, the needle valve produced at Instrulok have the ability to meet your needs of pressure rating to 10,000 psi and temperatures up to 1,200°F. As a matter of fact, the uniquely formatted low-temperature seal present at the needle valve made by Instrulok give you stunning elasticity even when exposed to less than 40 degrees Fahrenheit.

Many people are mistaken with flow control and Needle Valve being the same thing whereas in reality both are as different as sky and land. Even though these both the fittings maintain the flow of air in the pneumatic circuit leg, the major thing which differs both is that needle valve looks after the flow of liquid or gas in both directions. Whereas the flow control valve allows flow in just one direction. Naturally, both the fittings have an in-built threaded system which helps in harmonizing the quantity of liquid flowing through the valve. Moreover, the harmonized flow goes into the input port and further goes through then opening cavity which is basically the size of the tapered stem. Addition to this, another difference is that the flow control has a feature called bypass feature which makes sure that the liquid flows rapidly and freely. Above all, there are two kinds of flow control fittings which are applicable in process of selection and placement. Another very common valve is the meter-out valve which helps in flow fittings to reduce the total flow of an actuator. This is reverse flow control.

Types of Valve

The common valve used in to start or stop the liquid flow is the gate valve. Moreover, these valves also give an exact shut-off when closed. They are the “block Valve” for the solitary systems. Do not use gate valve to control the flow rate as the speed of liquid may corrode the inner walls of these valve, hence leading to damage. The types of gate valve are- rising stem and non-rising stem.

This kind of valve come into use where you need to control the fluid pressure with an advantage of using them in any position be it open or close. Above all, a Globe Valve is an output of a single or double port and plug organization with a double port because it gives you exact control on the flow. As there is double valve plug arrangement, each plug receives an internal stress equilibrium beyond the plugs in opposite direction giving a smooth control on the valve. In addition to this, there is another type of valve known as “reverse acting” which rather than opening, gets closed. The demands of a process set the application of the globe valve.

The Needle Valve is just a minor different from the Globe Valve. As the name suggests, obviously the needle valve are narrow in shape with tapered plug and port arrangement. Available in small size, the needle valve is useful for a perfectly generous flow.

This is another variety or kind of Globe Valve and is usually used to compress recycling systems and also for dirty liquids. Often used for compressor recycle systems, the fluid flow in Angle Valve has an entrance from the bottom of the plug and the passage goes throughout an angle of 90 degrees to the outlet. Well, the biggest advantage of an Angle valve is that it can be manually operated.

Consequently proving a more streamlined flow of the liquids, this Plug or Needle Valve is of almost the same size of that of an inner diameter. Easily operated by just turning around the handle to 90 degrees, and a fair shut-off with some real degree control is their special skills.

Fluids through such kind of valve flow only in one direction. With a major intention of preventing back-flow, Check valve is applicable in hand pumps where backflow is needed. Furthermore, the valve gets closed by the weight of piston ball or flapper when the flow halts. Also, the valve closes firmly when the pressure downstream of the valve is much greater than the upstream side, hence restricting the backflow to occur.

Mainly created to give full flow using some control ability, Butterfly valve don’t give absolute shut-off but the present advancement in technology has made these butterfly valve consisting of a “Bubble-tight” shut off.

Standards of Needle Valve produced by Instrulok-
1. BS 7174 P4 – Specification for introducer needles, cannulae, dilators, guide wires, valve, and connectors
2. PIP PNDMV09N – Needle valve data sheet and standard terms
3. MIL-V- 24586 – Valve, needle, size 1/4-inch and 1/2-inch

Choose the Right Needle Valve for you…!!!

You must know for certain about size, system pressure, materials and operating temperatureswhile selecting the needle valve type according to your uses. Please keep the below suggestions with you while purchasing valve:

The pressures vary according to the type of work the needle does. In fact, Robust needle valve can possess a pressure of 5000 and 6000 psi at a temperature of 100 degrees Fahrenheit. When high pressure is the requirement, other valve which go till 10,000 psi at the same temperature are also available.

First and foremost, Compact needle valve are the ones which come into use when size matters. They are available in different sizes and end connection options. Their achievement of pressure ratings can be using male or female ends in standard or metric measurements. The metric size of needle valve ranges from 2 to 11 mm and standard sizes of 1/8” to 1”. To avoid leakages and destruction along with ensuring smooth flow check the valve size properly.

The use of needle valve is in various industries with different environments everywhere. The packing done in needle valve will let you know the ability range of temperatures it can face. Very common two materials used in increasing a valves temperature capacity range are PTFE and PEEK.

Various materials work together to produce needle valve. The most common ones are 316 stainless steel, carbon steel, brass and alloy 400. 316 stainless steel is applicable in high corrosive works, sampling systems, chemical processes, etc.

Instrulok, with its advanced technology and skilled employees, manufactures various other products such as Thernowells, Gauge cokes and savers, pulsation Dampers/Snubbers,etc. Manifords valve, Gate valve, needle valve, High-pressure ball valve, Globe valve, etc are also born. Moreover, non-return valve, safety valve, check valve, butterfly valve, sanitary stainless steel flama & Daily fitting and valve, Hydraulic tubes and pipe fitting and hoses, etc. are manufactured at Instrulok.

Why Instrulok?

1. Best packaging service offered.
2. Different raw materials for different applications of valve
3. Faster and Ex-stock delivery
4. Best Quality, cost, and Delivery offered.

Aims and Visions:

At this point, keeping an eye for supplying world’s best quality products along with looking forward to total customer satisfaction. Instrulok has been ultimately working towards the progress of its own, its employees and also of its customers.